Buy RealAir Lancair Legacy for FSX (DVD) Online - PC Aviator Australia

Widely regarded as the best Lancair model available for FSX and built by RealAir Simulations, a leader in high-quality aircraft designs for Flight Simulator.
The Lancair Legacy ‘kit build’ aircraft is a superb sports plane and IFR tourer combining light aerobatic capability with luxurious cabin and extensive fully equipped IFR rated panel. This low wing, twin-seater composite aircraft with retractable gear is capable of cruising at 280 knots at 8,000 feet, can climb at 2,000 feet per minute and has a service ceiling of 18,000 feet.

RealAir have surpassed even their own high standards with the level of detail and enhancements included in this aircraft. From their renowned three dimensional fluid gauges to accurate flight dynamics, this simulation exudes quality. Side slipping, spinning, stall buffetting, airframe vibration, even flaps and gear damage is modelled with sound and visual effects. The whole cockpit shudders on startup as the starter fights cylinder compression and needles vibrate in their displays through engine and ground vibration making this aircraft feel truly alive.

RealAir Simulations has a long history of ground breaking innovations and many of these innovations have been adopted by other developers - even Microsoft itself. RealAir were the first developer to simulate proper spin and side-slip capabilities at a time when Flight Simulator was not theoretically capable of allowing such things. They were also the first to offer a Virtual Cockpit with smoothly animated 3D gauges and for many years remained the only developer providing this. In addition they were one of the first developers to implement stall buffet effects, GA aircraft engine failure modes, pilot inertia effects, 3D cockpits with flexible views, proper stereo sound imaging without unwanted phasing effects, and a wealth of other features. The Legacy is packed with these innovations and also has NEW cutting edge features which truly stretch the limits of Flight Simulator X (FSX).

The RealAir Legacy models every nuance of flight. The reaction of the airframe and wings to different flying & weather conditions and pilot input has been simulated as close as possible to the real aircraft within the limitations of FSX capabilities. These flying qualities are very important to the realism of the simulation. A high proportion of documented GA aircraft accidents are caused by loss of lift in difficult conditions while flying slow at low altitudes, typically when on approach to an airfield. For that reason, the Legacy has been designed to react realistically to piloting error giving unprecedented realism and is a further enhancement of RealAir's legendary innovations in flight dynamics.

• Stunning 2048 pixel high definition textures internally and externally. Fully functioning VC gauges operational even when seen from external view.
• Nearly 100 custom sounds including all switches, G-effects, canopy open windblast, gear, aileron flutter and damage and doppler fly-past.
• Airframe vibrates in reaction to engine rpm changes, gear and spoiler deployment, runway surfaces, startup/shutdown and mishandling.
• Five unique liveries with individually coloured virtual cockpits. Reality XP compatible with auto configuration to install the Reality XP GNS530 and GNS430 units.

"The RealAir Lancair Legacy for FSX is no doubt the most advanced, most realistic, and most fun to fly of any general aviation add-on available today. The awesome combination of many totally new visual effects and animations with their accompanying sounds are absolutely astonishing. I therefore recommend the coveted Avsim Gold Star be awarded to RealAir Simulations. I really wish there was a recognition that was even a little higher than our Gold Star, maybe a Platinum Star or a Sierra Hotel Gold Star. I would surely recommend that one also. The Legacy is that good." - Avsim Gold Star award.

"If not 'the most' complete and comprehensive package in the general aviation aircraft category for FSX available today, it is definitely one of the most." - Mutley's Hangar 10/10 Award for Excellence.

Product Features

• Trademark best-of-business flight modeling with improved spins, sideslips, aerobatics and superb handling, as well as extremely stable autopilot control.
• Beautifully designed interiors with smooth lines, crystal clear gauges, subtle reflections and all controls animated.
• Exterior and interior models now integrated for best experience with camera addons and track IR.
• High resolution multi-LOD exterior 3D models with optional frame rate friendly versions for multiplayer sessions.
• Optional RXP GNS WAAS gauge integration (RXP gauges are a separate purchase from Reality XP).
• RXP configurations include: 1 x GNS530, 1 x GNS430 + 1 x GNS530. If you have the RXP Unlimited pack you can also choose 2 x GNS530, 2 x GNS430 or 1 x GNS530 + 1 x GNS430, all with crossfill.
• Airframe vibrates in reaction to engine rpm changes, gear and spoiler deployment, runway surfaces, engine startup/shutdown and mishandling.
• Gauge needles that vibrate on the ground in response to engine and ground roll vibrations.
• Nearly 100 Custom sounds, including all cockpit switches, G effects, canopy-open windblast, gear, aileron flutter, doppler fly past etc.
• Flap Failure mode with custom animations and sound effects.
• Belly landing capability for gear up landings.
• Grass or concrete touchdown sounds option.
• Full multiplayer support with low latency and efficient coding for multiplayer sessions.
• Yaw and out-of-balance yaw sound effects.
• Carefully implemented start up and shutdown animations and sounds.
• Full IFR capability - or fly by the seat of your pants!
• Custom 3D landing lights, navigation lights and strobe lights.
• Dozens of custom animations including a canopy that realistically repsonds to wind force.
• Control sticks and control surfaces that move in response to trim changes.
• High detail skinned-mesh pilot.
• Spoilers with custom wind sound effects and cockpit buffet effect.
• Aileron flutter when flying above VNE with accompanying custom sounds.
• Fully functioning cockpit when viewed from exterior view, plus the option of a less highly detailed model for multiplayer.
• Multiple options for many of the above features.
• 3D blurred propeller effect with custom animation that includes simulated cylinder compression of startup and shutdown.
• 2048px "High Definition" VC and exterior textures.
• Five unique liveries all with uniquely coloured virtual cockpits.

System Requirements

1. MICROSOFT FLIGHT SIMULATOR X
2. Windows - Windows 7, 8, Vista or XP
3. Internet Connection for Online Activation Required
4. Processor - 2.8 GHz
5. Memory - 2 Gb RAM
6. Hard Drive - 500 Mb
7. Video Card - 256 Mb

Order your copy of the RealAir Lancair Legacy on DVD right now at http://www.pcaviator.com.au/store/product.php?productid=19868

Ground Environment X Asian and South America World Edition (DVD) Buy Online!

Ground Environment X Asia and South America builds on the award winning techniques of the GEX series and continues using our new approach in texture design, incorporating high level detail graphics in the default Flight Simulator X 1-meter texture resolution format. This delivers a hi-fidelity image without using excessive disk space or processor power. Our design allows a simulation pilot to enjoy clearly defined visuals from nearly ground level up to higher altitudes.

Ground Environment X brings all-new ground textures to FSX, and it boasts an incredible 1 m/pixel texture resolution, using native 1024x1024 pixel images, and includes all seasons, meticulously designed night textures and the latest techniques in autogen placement and alignment. All this while keeping maximum Flight Simulator performance in mind during development.

The easy-to-use interface will provide for easy installing the new textures, and is designed with Flight1's "keep-it-simple yet powerful" philosophy.

ITS ALL AUTOMATIC NOW!

• Automated detection of GEX regions as they are added as well as UTX regional products.
• Automated one click/browse move of backup directory with free space verification.
• Refined update system which checks for updates of all products at once.
• Automated install order of GEX regions as they are added or removed.
• Single interface readout and control for all GEX region products.
• NO INSTALL orders or specific install directories to deal with.
• Install different GEX regions to any location on your system.
• Direct product links from the interface to add new regions.
• Real time region status interface readout.
• Universal user manual for all products.

Features:

• GEX WORLD" single interface control for all GEX regions:
• Complete coverage of North America (United States, Canada, and Alaska).
• Enhanced textures to assist in rendering clear visuals as low as 250-500 ft.
• High volume autogen layout with optimizations for maximum performance.
• Update system checks for updates of all installed GEX products at once.
• Upgrade patches provided for UTX USA/Canada and UT Alaska users.
• Automated install order of GEX regions as they are added and removed.
• Syncronizes all GEX regions. No texture switching between regions.
• Full texture support for SceneryTech and Xclass landclass products.
• 1m/pixel - 1024x1024 Textures - No excessive resolution to render.
• Automate file backup system with merged region backup storage.
• Single interface readout and control for all GEX region products.
• Textures derived from licensed Aerial and Satellite imagery.
• 2D enhancements produce 3D depth in textures.
• Direct product links from the interface to add new regions.
• FSX tree render issue addressed in autogen annotation.
• Automated one click/browse move of backup directory.
• Includes all seasons and night lighting environment.
• Realistic custom designed night lighting textures.
• Real time region status interface readout.
• Improved default FSX road night lighting.
• Universal user manual for all products.
• Highly detailed aerial views.
• Natural seasonal blending.

System Requirements:

1. Flight Simulator X
2. DVD Drive
3. 2.6 Mhz Processor
4. 5 GB Hard Drive Space
5. 1024 RAM
6. 256 MB Video Card
7. Windows XP / Vista / 7 / 8

Order GEX Asia and South America on DVD at http://www.pcaviator.com.au/store/product.php?productid=19869

Lelystad X Airport Scenery for FSX (Instant Download) - PC Aviator

Lelystad Airport is located at -12 feet in the heart of one of the main polders of The Netherlands. It is where most Dutch civilian flying schools are located and its a brilliant airport for training.
This scenery has been done with great attention to detail according to the most up to date ideas on making scenery for FSX. It is very good looking but it is also extremely framerate friendly.

The Aviodrome, the aviation theme park and biggest aviation museum in the Netherlands is housed on the airport and has a large collection of aircraft, many of which are in flying condition. These are on display outside and you will be able to use the stands of the museum to park your aircraft. If you fly our Catalina for example you can exactly recreate an everyday event at Lelystad! It's the perfect airport to train your traffic circuits!

Features:

• Airport in great detail, all buildings and installations to 2009 standard
• Aviodrome in superb detail with most aircraft on display included
• Made in compliance to the latest standards, extremely good framerates
• Placed on 50 cm aerial image, with higher definition textures for airport terrain.
• Unprecedented animations of apron activity
• All buildings done with full volumetric shadow
• Full seasonal textures
• Detailed night lighting (including reflective taxiway markers)
• All taxiway and runway lights in 3D
• Extended manual in English/Dutch with all charts
• Completely compatible with traffic Addons

System requirements:

1. Microsoft Flight Simulator X (Acceleration or SP2)
2. Microsoft Windows XP, Vista, 7 (fully updated)
3. 2.0 GHz CPU (Duo2Core recommended)
4. 1 GB Ram (2 GB recommended)
5. Graphics card with 256 MB (512 MB recommended)
6. Download-Size: 280 MB
7. Installation-Size: 400 MB

Order Lelystad X for FSX from http://www.pcaviator.com.au/store/product.php?productid=19894

Adelaide International X (YPAD) Airport Scenery for FSX - PC Aviator Australia

At Last! A scenery expansion package for Adelaide International Airport in South Australia (ICAO Code: YPAD) is available right now for Flight Simulator X pilots.

Exclusively Available from PC Aviator Australia!
Get it First... Get it Right Now!

Capable of handling large heavy jets, this International airport in the capital city of South Australia is perfect for your PMDG 737 NGX, your Dash 8 Q400, your 747s and 777 heavy jets. And of course, you can fly into Adelaide with your lighter jets if you wish to do so as well.

The foundation of the scenery is a high quality 30cm aerial photo, from which we have developed a custom ground layer over the top combined with unique night lighting effects.

Have fun exploring this amazing airport, we have added many features so you’ll be discovering new things for a long time to come.

Below are just some of the many features you will discover.

• Highly detailed representation of YPAD, built from the ground up for FSX
• Highly detailed custom ground layer with loads of texture detail at high-resolution
• 30cm/pixel High Resolution Aerial Image was used for the airport grounds and immediate surrounds for added realism and clarity
• Custom and Realistic night lighting - even the light from the terminal windows throws out onto the apron!
• Accurate placement of buildings and vegetation within the airport grounds - Designed for a good balance between detail and performance.
• High Quality hand painted textures
• Working Navaids (ILS, VOR/DME, NDB)
• Animated road traffic around the airport
• Accurate Gate Assignments
• Ready to go and compatible with default and most AI Traffic Programs
• Living environment
• Option to add even more detail to the airport if your PC can handle it!
• Simple, easy to use installer requires just a few mouse clicks and you are ready to fly!

Adelaide X scenery is compatible with FSX default scenery, as well as FTX Australia region scenery.
PDF User Guide is included for reference, and includes airport information as well as a brief history of the airport.

Don't let this chance to fly and operate from an upgraded Adelaide International airport pass you by!
Order now and fly between major Australian hubs with enhanced scenery on the Adelaide side.

Would you prefer a disk copy instead?
Don't like to download? No problem! We understand. That is why at PC Aviator Australia, we have the world's best and cheapest disk backup system. We can master you a copy of this download product onto a DVD disk, label print it, and mail it to you anywhere in the world for just $5.95 extra. So if you require a hard copy for ease of acquisition or installation, or just wish to have a backup copy on hand for later use, order the backup DVD option from the "Delivery Options" menu below and we will get your disk copy in the mail and on the way to you.

This product is sold for private, individual use only.
Commercial Licensing: If you require commercial licensing of this scenery product for public, educational or non-private use, please contact us for information.















Order your copy of Adelaide International X scenery for FSX from PC Aviator Australia at:
http://www.pcaviator.com.au/store/product.php?productid=555209

Nemeth Designs Mi-24V 'Hind E' for FSX (Instant Download)

The well known Mi-24 is an attack/low capacity transport helicopter which was developed by the Mil Moscow Helicopter Plant in the late 70s in the former Soviet Union.

The Mi-24 (NATO designation Hind) is one of the most widely-known assault helicopter gunships in the world, and remains in service with at least 50 air arms.

The Mi-24 was developed from the Mi-8 multirole transport helicopter and was first flown in V-24 prototype form in 1969. The definitive initial production variant was the Mi-24D Hind-D. This introduced heavily-armored, stepped cockpits ant an undernose gun turret. This gunship has a crew of three and can carry up to 8 fully-equipped troops.

The Mi-24V type, (NATO code HIND-E), is the advanced version that came from the Mi-24D type. The major change is in the use of a STURM-V device, which is the modern and more efficient navigation system, and the use of 9M 114 (AT-6 SPIRAL) anti-tank guided missiles, which are fired from two cylinder containers mounted at each wing tips. It's capable of 310km/h in high-speed cruise, 750 km maximum flight distance and 12,500 kg maximum takeoff weight.

This addon represents the "Mi-24V Hind F" variant.

Features:

• Two variants with 2-2 repaints for each.
• Detailed exterior and interior models
• Custom dirt and rain windshield effects
• Hundreds of custom animations on the exterior and interior models
• Night cockpit lighting
• Fully clickable dynamic virtual cockpit
• 3D animated instruments
• Based on original blueprints, documentations
• PDF manual

This addon requires Acceleration Expansion Pack for FSX installer to run properly.









Order your copy now at http://www.pcaviator.com.au/store/product.php?productid=19887

Wilga X Aircraft Add-on for Flight Simulator X (Download) - PC Aviator Australia

The PZL-104 Wilga 35A is a remarkable aircraft. It was designed in the early 1960’s and it took many evisions before the developers got to the version that became a standard aircraft on many Eastern European airfields. After the collapse of the Berlin Wall many of the Wilga’s found new homes in Western countries where they still work like the reliable and sturdy aircraft the designers had in mind.

If you are only used to Cessna’s or other western GA aircraft the Wilga is a bit of a shock. It’s far larger then it seems to be from a distance. It also looks weird with the long undercarriage and the huge engine and propeller. Flying the Wilga is also something special. It is totally utilitarian, a bit slow (drag is as huge as the engine is) and it feels like a much larger aircraft. But it is totally dependable, very easy to fly and you can land on a dime. It can even take up three (!) gliders at the same time. It’s special, it’s something else, it’s the PZL 104 Wilga.

Our version for FSX is created with the latest standards by the OctopusG group. The main developers fly this aircraft almost every week so they knew the real aircraft down to the smallest details. If you are looking for a solid small aircraft that can take a beating and can be flown from the smallest strips the Wilga is ready for you.

Features:

• Easy on framerate
• Six different version (Russian/Polish/German/US versions included)
• Many special animations
• High definition Virtual Cockpit
• Many systems made with special modules to avoid FSX limitations
• Highly realistic flight model, tested by actual Wilga pilots
• Sound set created from real recordings (including all cockpit sounds)
• Extensive manual
• Easy to use installer

System requirements:
Microsoft Flight Simulator FSX (with SP2 or Acceleration Pack)
Windows XP, Vista, 7 (fully updated)
Dual Core CPU
2 GB RAM internal memory
512 MB graphic card
Adobe Acrobat® Reader 8 minimal to read and print the manual
Download-Size: 170 MB



Buy the Wilga X addon now at http://www.pcaviator.com.au/store/product.php?productid=19891

[Download Here] FS Flight Keeper for FSX, FS2004 and FS2002

The Swiss Army knife of FS Tools and Utilities is here!
FS Flight Keeper (FSFK) combines seven programs in one: A Logbook, an Aircraft Black Box, a Flight Weather planning tool, a Flight Information System (ACARS Device), a Ground Proximity Warning System (GPWS), a Cockpit Sound Environment enhancement and last but not least Air TV.

The Logbook keeps track of the flights you made. It stores flight times (also day and night times), fuel used, pilot, aircraft used, etc. Whilst the Black Box logs all aircraft events like autopilot settings, engine settings, weather, etc. (check out the full list below). FSFK also features flight Weather Planning (METARs, TAFs and ALOFTs), data export, configurable flight critique, moving map display, instant messaging, screenshot manager and much more. There are so many features that we heard from seriously experienced users that they found new functions months after starting to use the product! If you look at the screenshots you will note that the interface is highly professional and allows easy access to all functions.

FS Flight Keeper contains many features for Virtual Airlines (VA), which need a standardized way of logging, transmitting flights and even want to upload actual flight reporting maps. FS Flight Keeper can transmit fully customizable flight reports via Email or any available Web Service (page). FSFK also offers realtime (live) ACARS. This means that ACARS messages are created in realtime and automatically transmitted to an Virtual Airline web service. The service can then store and process the received messages. Virtual Airline (live ACARS) Traffic can be displayed on the world map. With the Virtual Airline Software Development Kit (SDK) and the contained example services and databases any VA can develop FSFK compatible web service in a really short time.

The Cockpit Sound Environment brings your cockpit to life. Easily add crew announcements, which will be played automatically on different flight situations (e.g. pushback, passenger security information, crew prepare for landing, etc.). You can also add a virtual copilot that gives you aural information for different aircraft status changes (e.g. gear down and locked, glide slope active/captured, etc.). Cabin ambient sounds with full 3-D surround sound support will give you the feeling as if the passengers were really in your aircraft. But sounds can not only be played automatically, you can also play pre configured sounds manually by pressing a configurable hotkey. Last but not least you can add an aural GPWS/TCAS, which can be used for every aircraft even if it does not have one installed by default.

FSFK Air TV creates screen and/or video (webcam) captures and uploads them at a regular interval as JPEG image files to a FTP or HTTP server. Additionally you can add picture in picture (PIP) and text overlays to the captures. A great feature for your Virtual Airline or your personal web site allowing your visitors to visually track your flights.

Last but not least you can access all this information directly from your cockpit without the need to switch any application during your flight. The ACARS Device (Gauge) allows the pilot to easily view all important information and even control FS Flight Keeper while sitting in the cockpit. The ACARS Device offers a detailed text based view on the current weather conditions (e.g. wind and cloud layers with icing, turbulence and wind shear warnings), gives access to all important in-flight states and also contains a detailed airport and navaid information database. Additionally it has a map mode, which displays airports, navaids, traffic and also a detailed elevation overlay.

Features:

• NEW FEATURES AND CHANGES IN FSFK VERSION 3.50:
• New: Native Support for the Aerosoft Airbus X Extended A320/A321
• New: Import existing Aerosoft Airbus X Extended FDR recordings
• New: Windows 8.1 Support
• Changed: On a remote machine installation FSFK now loads the NAV DB and doesn`t longer show an error message if the FS PC is not on or the FS path is not available
• Fixed: Flaps up event not triggered after go around
• Fixed: Flight backups could not be loaded
• Fixed: No smoking and seat belt signs events missing in FSX
• Fixed: Landing vertical speed sometimes positive
• NEW FEATURES AND CHANGES IN FSFK VERSION 3.40:
• New: Native PMDG 737 NGX Support
• NEW FEATURES AND CHANGES IN FSFK VERSION 3.20:
• New: Native iFly 737 (FS9/FSX) event logging Support
• New: iFly 737 flight plan format Support
• New: TOPCAT Support
• New: Sound items for V-Speeds when using TOPCAT
• New: Decimal display to engine N1 and N2 settings
• New: Pause and resume flight logging
• Changed: IVAO and VATSIM FIR Data
• Changed: Improved G-Force detection for the landing phase
• Fixed: Entered transition altitude values are not longer overwritten
• Fixed: GPWS altitude callouts not played on approach if gear is up
• Fixed: Surface wind direction not correct with FSX
• Fixed: Wilco flight plan not loaded
• Fixed: Display problems with higher DPI settings
• Fixed: An assigned VA template (pilot or logbook) can overwrite other global templates and settings when opening the options dialog while in flight
• NEW FEATURES AND CHANGES IN FSFK VERSION 3.10:
  • Flight Export to Google Earth™ (KML)
  • Added Active Sky Evolution Support
  • Added Wilco flight plan format Support
  • Added Windows 7 Jump List Support
  • Improved accuracy of flight path
  • Filter addon airports on the world map
  • Highlight airline parkings on the world map
  • Recognition lights and G-Force on touchdown flight critique
  • Transition Altitude (TA) database
  • Default values for custom fields
  • G-Force and Trim (Elevator, Aileron and Ruder) values are saved for each recorded flight event
  • Added new functions to the ACARS Device Installer to remove or replace an existing (default) gauge in a panel with a Hotspot or the ACARS Device
  • ACARS Device Installer now allows editing of the Virtual Cockpit
  • Fixed altimeter and pressure rounding errors
  • Fixed flight path sometimes not correctly displayed on world map if there is no flight plan assigned
  • Fixed Air TV cannot be stopped
  • Fixed GDI initializing fails on some systems
  • Fixed VA template assigned to a pilot or logbook not working
  • Fixed PIREP flight image FTP upload not completed on some systems
  • Fixed VATSIM traffic not available on some systems
  • Updated offline ALOFT download location
• Multiple Logbook and Pilot management
• Supports all types of Aircraft
• Logs many Aircraft condition or setting changes
• Full Flight Simulator Scenery (automatic detection of Airports / Gates / Runways), Navaid (VORs, NDBs and Markers), Airway and Airspace support
• Support for VFR and IFR flights
• ACARS ([A]ircraft [C]ommunication [A]ddressing and [R]eporting [S]ystem) generation support
• Multi functional ACARS Device (Gauge) that displays a Moving Map, Logs, Status, Weather conditions and much more directly on your aircraft panel
• Full colored World (Moving) Map display that can display planned/flight, taxiway route, weather, flight events, AI, Multiplayer and Virtual Airline Traffic
• World Map can also display Airport details (taxiways, runways, parking, etc.), Navaids (VOR, NDB and Marker), Airways, Airspaces, Cities and a detailed terrain map
• Black Box flight playback on the world map
• Approach, ILS and vertical flight profile charts
• Cockpit (3-D) Sound Environment
• Air TV (create screen and video/webcam captures with overlays and upload them to your web site)
• Ground Proximity Warning System (GPWS)
• Traffic Alert and Collision Avoidance System (TCAS)
• Optional FS Support/Core Module
• Realtime (live) ACARS reporting via Web Service
• Virtual Airline PIREP/FREP transmission (via Email, any available Web Service or file based)
• Integrated (automatic or manual) METAR, TAF and Winds ALOFT download (offline or online) and decoder for easier reading
• Complete Flight weather planning and storing
• Display world wide weather (METAR/ALOFT) on the World Map
• Flight Simulator 2000/2002/2004/X Flight Plan support
• FSNavigator 4.x Flight Plan support
• PMDG Flight Plan support
• PIC 767 Flight Plan support
• Pause your Flights at any point in your Flight Plan
• Instant Messaging Service with File transfer feature (send Maps, Screenshots, etc.)
• Customizable HTML/Text Reports/Exports for Logbooks, Pilots, Flights, Aircraft, Airlines, Map, etc.
• Customizable Flight critique and scoring
• Screenshot Manager, that allows to take screenshots during your flight and lets you manage them later after finishing your flight
• Automatically start and connect FS Flight Keeper when you start the Flight Simulator
• FS2004 and FSX advanced weather support
• WideFS support
• System wide Hotkeys (also available through WideFS)
• Radar Contact v3 and v4 support (automatically reads alternate airport, transition altitudes and gates)
• Activesky X, Activesky Version 6.x, Activesky Version 5, Activesky 2004 and ActiveSky wxRE V1.6 support (online or offline)
• FS Meteo v5.2 and v6.0 support (online or offline)
• Weather Center 2 support (online or offline)
• My Traffic and Ultimate Traffic Scenery (Airport Facility Data - AFD) support
• IVAO and VATSIM support (weather download, traffic, controller, FIR and active zone display)
• Save and resume flights
• Highly customizable
• and much more ...

Information recorded by the Logbook and the Black Box:

• Aircraft information (Title, Tail number, Airline, Type, etc.)
• Times: OUT / OFF / ON / IN / Flight Time / Block Time / Day and Night Flight Time
• Weights: ZFW / TAW / TOW / LAW / RAW
• Fuels: OUT / OFF / ON / IN / Flight Fuel / Block Fuel
• Origin, Destination, Alternate Airport information (ICAO code, Gate, Runway, SID/STAR, Weather, Time Zone, etc.)
• Flight distance
• Pushback
• Rejected Takeoff
• Touch`N`Go and Go Arounds
• Takeoff and Landing IAS
• Maximum taxi speeds
• Maximum IAS below FL100 during departure and approach
• Autopilot
• Flight Director
• Flaps
• Gear
• Spoilers
• Parking Brake
• Auto brakes
• Auto throttle
• Engine
• APU
• Tank Selector
• Engine Fuel Pumps
• Engine Anti-Ice
• Pitot Heat
• Propeller De-Ice
• Lights
• Yaw damper
• Master Battery/Avionics switches
• Propeller Synchronization
• Auto-Feather Arm switch
• Pressure / Altimeter
• Altitude changes
• Heading
• Aircraft speeds (also vertical) during takeoff and landing
• Flight plan reports or Position reports (every 15 minutes, but this can be changed)
• Taxiway route
• Weather conditions (Temperature, Visibility, Wind Direction/Speed, Turbulence, Gust, etc.)
• Runway surface conditions
• Aircraft failures (Engine, Electric, etc.)
• Over Speed warnings
• Stall warnings
• Markers (Inner, Middle, Outer)
• Glideslope events (Active / Captured)
• Localizer events (Active / Captured)
• Transponder
• Radio frequencies (COM, NAV and ADF)
• Pause mode
• Slew mode
• Simulation Rate
• TCAS (FS2002/2004/X AI or Multiplayer Traffic)
• Cowl Flaps
• Reverse Thrust
• Average, Minimum and Maximum values for
• True Air Speed (TAS)
• Speed below FL100 for departure and approach
• Climb speeds
• Descent speeds
• G-Force
• Pitch
• Bank
• Engine Temperature (EGT)
• Engine settings
• Engine vibration
• Oil temperature and pressure
• Hydraulic pressure
• Cylinder head temperature (CHT)
• Manifold pressure

System requirements:

Software:
Microsoft Flight Simulator 2000*/2002/2004/X
Windows XP, Vista, 7
FSUIPC 3.8 for FS2000/FS2002/FS2004 and 4.3 for FSX (unregistered Version)
Microsoft MDAC/ADO 2.5 and MS Jet 4.0
Microsoft XML 4.0
* Note: for FS2000 the automated aircraft position detection of Airports/Gates/Runways is not available.

Hardware:
Pentium 2 GHz (3 GHz recommended)
512 MB RAM (1 GB recommended)
Minimum screen resolution 1024x768 (1280x1024 recommended) with 32bit colors
Download-Size: 260 MB
Installation-Size: 800 MB






Order FS Flight Keeper now from http://www.pcaviator.com.au/store/product.php?productid=19889